Bottle Image
VP Racing - 发动机装配润滑剂
Bottle Image
VP Racing - 发动机装配润滑剂

VP Racing - 发动机装配润滑剂

₱1,600.00
加入购物车 已添加到购物车

Fast Shipping Australia Wide

Trusted by Champions Worldwide

30-Day Returns on Any Purchase

经常一起购买

VP Racing - 徽标 T 恤（黑色）

VP Racing - 徽标 T 恤（黑色）

XS   黑色的

₱2,800.00

 
VP 发动机装配润滑油是一种优质高粘度润滑油。我们采用坚固的基础油进行设计，可在发动机组装和关键磨合过程中提供卓越的保护，防止磨损、磨损和金属转移。它提供卓越的保护，防止过度磨损，并且可与合成油和传统油混溶（可混合）。它是发动机的出色预润滑保护装置，包括气缸壁、活塞裙、轴承、凸轮轴、凸轮凸角、挺杆、腕销和其他气门机构部件。

为什么您需要优质装配润滑油
制造引擎是一个漫长的过程。完成发动机重建可能需要几周或几个月。因此，您需要一种能够长时间粘附在零件上的高质量发动机总成润滑油。我们的产品非常粘，确保它能粘在您的发动机部件上。此外，制造发动机所需的时间可能会使暴露的部件容易受到湿气和氧气的影响。这会导致金属表面生锈。 VP 发动机装配润滑油在装配和运输过程中为您的发动机提供最佳的防锈和腐蚀保护。

另一个关键点是磨损保护对于干启动非常重要。当发动机最初启动时，它在油压很小的情况下运行，这使得重要的发动机部件面临极大的磨损和潜在故障的风​​险。我们设计的润滑油含有锌、磷和钼抗磨添加剂，可确保提供最佳保护，防止过度磨损。

最后，由于我们的产品是可混溶的，因此它与VP 磨合发动机油兼容。它不会与油分离，也不会堵塞油口。这可能是基于润滑脂的装配润滑油的问题，如果首次启动发动机时润滑脂未完全消耗，则可能会导致发动机故障。

我们的装配润滑油可确保您的新发动机得到适当润滑。

产品优点

  • 超强的承载能力
  • 优异的油膜强度，防止磨损
  • 锌、磷和钼抗磨添加剂可防止过度磨损
  • 与合成油和常规油混溶
  • 在装配和运输过程中提供出色的防锈和腐蚀保护
  • 发动机的预润滑保护：气缸壁、活塞裙、轴承、凸轮轴、凸轮凸角、挺杆、腕销和其他关键部件
  • 由于具有极高的粘性/持久的附着力，因此不滴漏、不流淌的配方

该商品可运往澳大利亚各地。

www.vpracing.com.au 根据澳大利亚消费者保护立法处理退货和退款。

如果您希望退货，请在购买后 30 天内通知我们并提供有效的退货理由。如果我们无法解决您的投诉或进一步帮助您，我们将在及时收到所购买的商品后处理退款。未开封的商品将全额退款。退款将立即处理，并通过与您付款时相同的方式进行付款。所有退款均由www.vpracing.com.au自行决定。

在任何退款之前。换货或信用处理完成后，所有物品必须由您承担运回费用。

可以在VP Racing Fuels PTY LTD取货

通常在 24 小时内就绪

Assembly Protection Technology

High Film Strength Protection

Engineered with a high-viscosity, high-tack formula designed to cling to critical engine components during assembly, storage, shipment, and initial startup protection.

High-Tack Formula
LONG-LASTING ADHESION
LOW HIGH
Wear Protection System
VP Engine Assembly Lube uses zinc, phosphorus, and moly anti-wear additives alongside a high-film-strength formula engineered to help protect critical engine components during assembly and break-in conditions.
Surface Adhesion
Long-Lasting Adhesion
No-drip, no-run formulation engineered to maintain long-lasting adhesion on critical engine components.
Anti-Wear Chemistry
Break-In Protection
Zinc, phosphorus, and moly additives help protect against scuffing, galling, and metal transfer.
Corrosion Defense
Rust Protection
Helps defend exposed engine components from oxidation and corrosion during storage or shipment.
Lubricant Type

Why Not A Grease Paste?

Heavy Paste
Grease-style lubes can leave heavy residue and may resist proper oil integration if overapplied.
EXCESSIVE THICKNESS
Heavy paste style formulations can create uneven coating distribution across bearings, camshafts, lifters, and other critical engine components.
RESTRICTED STARTUP
Some grease-style assembly pastes may resist rapid oil circulation during the critical startup phase before full oil pressure is achieved.
Pre-Lube Engine Protection

What VP Assembly Lube Delivers

Engineered to protect critical components during assembly, shipment, storage, and the high-wear conditions of initial startup.

Load Protection
Superior Load Capacity
Designed to withstand high pressure across bearings, camshafts, lifters, and valvetrain components.
Film Strength
Wear & Scuff Protection
High film strength helps reduce excessive wear, galling, and metal transfer during break-in.
Surface Adhesion
Long-Lasting Adhesion
Relentlessly tacky formulation clings to metal surfaces for extended protection during long engine builds.
Corrosion Defense
Rust & Oxidation Defense
Protects exposed metal components from moisture, corrosion, and oxidation during storage or shipment.
Startup Lubrication
Pre-Lube Startup Safety
Provides critical lubrication before full oil pressure is achieved during initial engine startup.
Oil Compatibility
Miscible Formula
Blends safely with synthetic and conventional oils without separating or clogging oil passages.
Banner Image

你可能还喜欢

产品数据表