MRPRO-6 REG
Racing fuel drum
MRPRO-6 REG
Racing fuel drum

MRPRO-6 REG

$322.00
ENQUIRE NOW FIND A RESELLER

Contact us for Shipping

Trusted by Champions Worldwide

30-Day Returns on Any Purchase

Buy it with

Coolant Bottle

Stay Frosty - Race Coolant

Single   1.89 Litre

$30.00

 

Formulated for AMA MX and SX. It is stocked in Australia, however, this fuel does not meet nor comply with MA fuel rules.

 

 

This Item cannot be purchased online. Please call our sales team on 02 9723 4233 to purchase direct, or Find A Reseller

This product does not comply with the Australian Petrol Standard and requires a racing license to be presented at the time of purchase.

This fuel contains MTBE and cannot be used in fresh water ways, or fresh water lakes.

Motor Octane | 86

Research Octane | 104

Oxygen Content | 3.89%

Specific Gravity | 0.725

RVP | 11

Colour | Clear

SAFETY DATA SHEET

Pickup available at VP Racing Fuels PTY LTD

Usually ready in 24 hours

RON octane
104
Oxygen content
3.89%
Specific gravity
0.7250
SPECIFICATIONS
GASOLINE Unleaded
Motor octane (MON) 86
(R+M)/2 95
Reid vapour pressure 11.01 psi
Stoich. A/F ratio 13.72:1
Colour Colorless
Drag Racing
Not suitable
Circuit
Not suitable
Bike
Excellent
Nitrous
Not suitable
MX / SX
Excellent
Rally / Off Road
Not suitable
Boosted / Turbo
Not suitable
Marine
Not allowed
tuning INFO
Oxygen content
3.89%
MODERATELY OXYGENATED FUEL
tuning info
Moderate oxygen content improves combustion efficiency.
Requires a small increase in fuel delivery.
Less aggressive tuning changes than high-oxygen race fuels.
What is Oxygen Content?
Oxygen content refers to the amount of oxygen within the fuel itself. Higher oxygen content allows more complete combustion, increasing power potential while requiring additional fuel delivery to prevent lean conditions.
STOICHIOMETRIC AFR
13.72:1
98 RON Petrol
14.7
MR Pro 6
13.72
Requires Increased Fuel Volume Compared To Standard Petrol
Tuning Info
Lower stoichiometric AFR requires increased fuel delivery versus standard petrol.
Moderate oxygen content may require additional enrichment under load.
Use lambda for accurate tuning across different fuels.
What is Stoichiometric Air-Fuel Ratio?
The stoichiometric air-fuel ratio defines the ideal mixture for complete combustion. Different fuels require different ratios, meaning fuel delivery must be adjusted during tuning to maintain correct combustion and performance.
SPECIFIC GRAVITY
0.7250
0.70 Specific Gravity Comparison 0.80
MR PRO 6 0.7250
Pump 98 0.750
MR Pro 6 is less dense than pump fuel, requiring increased fuel volume.
Tuning Info
Lower density delivers less fuel mass per volume.
Increase fuel delivery to maintain correct AFR.
What is Specific Gravity?
Specific gravity measures the density of the fuel relative to water. It determines how much fuel mass is delivered for a given volume. Lower density fuels deliver less fuel mass per volume, which can cause a lean condition if not corrected.
Reid Vapour Pressure
11.01 PSI
HIGH FUEL VOLATILITY
tuning info
High vapour pressure increases evaporation and responsiveness.
Improves cold start and transient fuel behaviour.
Monitor heat conditions to avoid vapour-related issues.
What is Reid Vapour Pressure?

RVP Measures the volatility of a fuel and how readily it evaporates at a given temperature.


In forced induction applications, a lower RVP resists vaporisation under boost, reducing the risk of vapour lock. Naturally aspirated engines benefit from a higher RVP, where easier vapourisation improves atomisation and throttle response.

Disclaimer

All specifications and tuning guidance are provided for informational purposes only and should not be relied upon as definitive tuning instructions. VP Racing Fuels assumes no liability for engine damage, failed tunes, or performance outcomes. Users are solely responsible for correct fuel selection, tuning, and application.

STILL NOT SURE WHICH FUEL IS RIGHT FOR YOU?

FUEL GUIDE

You might also like